ALL Necessary Hardware Included - Welded construction ready to bolt to the frame of your truck!

Outlaw Premium Winch Mount

2010-2018 Dodge Ram 4500/5500
Trusted by loggers, firefighters, linemen, oil field pipe-line welders, heavy equipment operators, park rangers, hunters, and many other hard working Americans.  This bumper provides simple access to the winch when you need it most.  The winch sits higher and the line on the winch drum is visible making it easier to focus on the task of winching.  Full, clean welds are a staple throughout this bumper making it structurally stronger and more resistant to the elements. Thick expanded metal grille protection, 2" receiver beneath the winch mount, 3/4" shackle mounts for towing, and fog light sleeves are standard on this bumper. Angled diamond plated steel lower provides maximized ground and tire clearance. The finish is achieved through a multi-step coating process which includes a primer base coat. The finish is gloss black powder coat that will compliment the color of nearly any truck. Frame mounted using existing bolt holes.
Price: $2,395 

Part #: TFR1022WMD


Dodge Heavy Duty Ranch Bumpers
2010-2018 Dodge Ram 4500/5500

(855) 286-7379

Outlaw Premium
2010-2018 Dodge Ram 4500/5500

Over the past decade this bumper has proven itself countless times. Fire Departments, oil and gas companies, the U.S. Department of Interior, power line companies, cross-country hot shot drivers, and the back roads 3rd shift commuters all rely on this bumper to keep them moving because time matters most. Full welds are a staple throughout this bumper making it structurally stronger and more resistant to the elements. Thick expanded metal grille protection and a 2" receiver (welded on front and back of the 4" pipe) are standard upgrades. This bumper does NOT retain the factory fog lights as shown in the photo (there is solid diamond plate skirting where the fog lights are located). Reverse angled diamond plate steel lower provides maximum ground and tire clearance with a center lower cross bar to provide drive line protection for the undercarriage. The standard finish is gloss black powder coat that will compliment the color of any truck. This bumper retains the oversize 4500/5500 factory  tow hooks beneath the bumper. Headlight bars are 1.25" OD which is larger than the industry standard size. The outer headlight loops are connected to the base of the bumper with a thick 3/8" steel gusset welded on both sides to provide added rigidity to the outer portion of the brush guard and added protection for the headlights. The bumper is frame mounted using existing bolt holes. Comes with all necessary hardware for mounting.  If additional options are needed the base price of the bumper is $1,995.
Approx Weight: 285lbs
Price: $1.495​                                       
*Item #: TFR4510D (4500/5500)

 Available for:

2010 Dodge Ram 2500 - 2010 Dodge Ram 3500 - 2010 Dodge Ram 4500 - 2010 Dodge Ram 5500

2011 Dodge Ram 2500 - 2011 Dodge Ram 3500 - 2011 Dodge Ram 4500 - 2011 Dodge Ram 5500 

2012 Dodge Ram 2500 - 2012 Dodge Ram 3500 - 2012 Dodge Ram 4500 - 2012 Dodge Ram 5500 

2013 Dodge Ram 2500 - 2013 Dodge Ram 3500 - 2013 Dodge Ram 4500  -2013 Dodge Ram 5500 

2014 Dodge Ram 2500 - 2014 Dodge Ram 3500 - 2014 Dodge Ram 4500 - 2014 Dodge Ram 5500

2015 Dodge Ram 2500 - 2015 Dodge Ram 3500 - 2015 Dodge Ram 4500 - 2015 Dodge Ram 5500 

2016 Dodge Ram 2500 - 2016 Dodge Ram 3500 - 2016 Dodge Ram 4500 - 2016 Dodge Ram 5500

2017 Dodge Ram 2500 - 2017 Dodge Ram 3500 - 2017 Dodge Ram 4500 - 2017 Dodge Ram 5500

2018 Dodge Ram 2500 - 2018 Dodge Ram 3500 - 2018 Dodge Ram 4500 - 2018 Dodge Ram 5500

Deluxe Front Replacement
2010-2018 Dodge Ram 4500/5500

The Deluxe is truly unlike any other bumper on the market. It is built with a rigid 4" pipe base and angled front diamond steel protection plates that wrap back to the fender well for a more streamlined appearance and heavier-duty protection. It has a fully welded tubular steel grille guard featuring 1¼" (above industry standard) light loops that are welded to the outer base of the 4" pipe with 3/8" plate steel for added "deer stopping" strength. In the final stages of production, the finish is achieved through a 9 step coating process which includes an 'anti-rust primer' base coat before powdercoating. Standard finish is gloss black powder coat that will compliment the color of nearly any truck. *Must specify 4500/5500. *If truck is a 2016/2017 you must specify if your truck has front parking sensors*

Price: $1,795
Item #: DFR2010D
Available Options: (click here for more info)