(855) 286-7379

Diamond Steel Pro Series
2010-2018 Dodge Ram 2500/3500

Standard finish is black gloss powdercoat.  If you are looking for a heavy duty full replacement bumper with a 2" receiver for towing or winching, flat plate steel on the front, and you want it to sit closer to the truck than any other ranch bumper on the market, this is it. Built with nearly the same look Diamond Steel bumper above, only the Pro Series has heavier 1/4" flat plate steel and a welded in 2" receiver. The contour of the bumper compliments the lines of the grille and headlights to keep the front of your truck from looking too beefy. Many customers feel the fit and look is so good that they have it custom painted to match the color of their truck. This bumper will allow you to retain use of your factory tow hooks and fog lights. It comes with all necessary hardware for mounting directly to the frame of the truck, no drilling required. Standard coating is black gloss powdercoat. *If truck is a 2016/2017 you must specify if your truck has front parking sensors* (Approx: 266 lbs)​
Price: $1,695
Item #: 130-41-0006

HD Winch Mount Pipe Bumper

*2010-2018 Dodge 2500/3500

*Note: NOT compatible with (10-12) Ram Diesel engine trucks. This is a beast of an internal winch mount bumper. Weighing in at 355 lbs this bumper has it all. Standard accessories include: shackle mounts, punch plate grille protection (with removable screen for camera viewing), 2" recceiver, fog light accommodations, and the winch mount. It comes in a semi-gloss black powder coat.

Price: $1,595

Part #: HD12260RW

Deluxe Front Replacement
2010-2018 Dodge Ram 2500/3500/*4500/*5500

The Deluxe is truly unlike any other bumper on the market. It is built with a rigid 4" pipe base and angled front diamond steel protection plates that wrap back to the fender well for a more streamlined appearance and heavier-duty protection. It has a fully welded tubular steel grille guard featuring 1¼" (above industry standard) light loops that are welded to the outer base of the 4" pipe with 3/8" plate steel for added "deer stopping" strength. In the final stages of production, the finish is achieved through a 9 step coating process which includes an 'anti-rust primer' base coat before powdercoating. Standard finish is gloss black powder coat that will compliment the color of nearly any truck. *Must specify 4500/5500. *If truck is a 2016/2017 you must specify if your truck has front parking sensors*

Price: $1,795
Item #: DFR2010D
Available Options: (click here for more info)

Elevation Series

2010-2018 Dodge Ram 2500/3500
The Steelcraft Elevation Series is a sleek looking flat plate steel Heavy duty bumper. The Elevation Series is E-coated and powder coated matte black for enhanced protection from the elements. It carries a manufacturer 2 year warranty. The Steel craft heavy duty Dodge Ram bumper retains the factory tow hooks, fog lights and has a place for a license plate AND accommodates most 20" LED light bars. 
Price: $1,095

Part #: 60-12260

Diamond Steel Replacement
2010-2018 Dodge Ram 2500/3500

Built with fully welded, thick 11 gauge diamond plated steel and tubular steel pipe to meet both the needs of farmers wanting to keep cows from crushing the plastic in their grille during feeding as well as those wanting to turn heads driving through the city. This bumper sits closer to the body of the truck than most other "pipe" bumpers. The contour of the bumper compliments the lines of the grille and headlights to keep the front of your truck from looking too beefy. Many customers feel the fit and look is so good that they have it custom painted to match the color of their truck. This bumper will allow you to retain use of your factory tow hooks and fog lights. It comes with all necessary hardware for mounting directly to the frame of the truck, no drilling required. Standard finish is black gloss powdercoat.  *This bumper comes standard with parking sensor holes and plugs if you do not have parking sensors. (Approx: 198 lbs)
Price: $1,395
Item #: 300-41-0006 

Outlaw Premium Winch Mount

2010-2018 Dodge Ram 2500/3500/*4500/*5500
Trusted by loggers, firefighters, linemen, oil field pipe-line welders, heavy equipment operators, park rangers, hunters, and many other hard working Americans.  This bumper provides simple access to the winch when you need it most.  The winch sits higher and the line on the winch drum is visible making it easier to focus on the task of winching.  Full, clean welds are a staple throughout this bumper making it structurally stronger and more resistant to the elements. Thick expanded metal grille protection, 2" receiver beneath the winch mount, 3/4" shackle mounts for towing, and fog light sleeves are standard on this bumper. Angled diamond plated steel lower provides maximized ground and tire clearance. The finish is achieved through a multi-step coating process which includes a primer base coat. The finish is gloss black powder coat that will compliment the color of nearly any truck. Frame mounted using existing bolt holes.
Price: $1,795

Part #: TFR1022WMD

*4500/5500 price $2,395 with above mentioned options included

Dodge Heavy Duty Ranch Bumpers
2010-2018 Dodge Ram 2500/3500/*4500/*5500

Outlaw Premium
2010-2018 Dodge Ram 2500/3500/*4500/*5500

Over the past decade this bumper has proven itself countless times. Fire Departments, oil and gas companies, the U.S. Department of Interior, power line companies, cross-country hot shot drivers, and the back roads 3rd shift commuters all rely on this bumper to keep them moving because time matters most. Full welds are a staple throughout this bumper making it structurally stronger and more resistant to the elements. Thick expanded metal grille protection, 2" receiver (welded on front and back of the 4" pipe), fog light sleeves for the factory fog lights (not included on the *4500/5500 model), and 3/4" shackle mounts are standard upgrades you won't find on other bumpers. Reverse angled diamond plate steel lower provides maximum ground and tire clearance with a center lower cross bar to provide drive line protection for the undercarriage. The standard finish is gloss black powder coat that will compliment the color of any truck. Retains the factory  tow hooks. Headlight bars are 1.25" OD which is larger than the industry standard size. The outer headlight loops are connected to the base of the bumper with a thick 3/8" steel gusset welded on both sides to provide added rigidity to the outer portion of the brush guard and added protection for the headlights. The bumper is frame mounted using existing bolt holes. Comes with all necessary hardware for mounting. Approx Weight: 285lbs
(*Note: Does NOT accommodate parking sensors on 2016-17 trucks)
Price: $1.395​                                       Item #: TFR1022D (2500/3500)  
 *Item #: TFR4510D (4500/5500): comes standard with 2" receiver and expanded metal.  If custom options are added the base price for the bumper is $1,795.

ALL Necessary Hardware Included - Welded construction ready to bolt to the frame of your truck!

Outlaw Traditional

2010-2018 Dodge 2500/3500

Welded steel construction offering plenty of rigidity for the back roads. These are the same bumpers that we install on oil field and natural gas pipeline trucks year after year. They are made to take a beating and keep going. Customers tell us the only thing with body damage is the roadkill they leave behind. Not having to deal with the insurance company is priceless. Mounted directly to the truck frame. All necessary mounting hardware included. No Drilling Required. Note: If purchasing the winch mount this bumper does not allow retention of factory tow hooks. (Approx 245 lbs.)  (will not retain factory fog lights or tow hooks with winch mount)

Price: $995

2" Receiver: $95

Winch Mount: $190

 Available for:

2010 Dodge Ram 2500 - 2010 Dodge Ram 3500 - 2010 Dodge Ram 4500 - 2010 Dodge Ram 5500

2011 Dodge Ram 2500 - 2011 Dodge Ram 3500 - 2011 Dodge Ram 4500 - 2011 Dodge Ram 5500 

2012 Dodge Ram 2500 - 2012 Dodge Ram 3500 - 2012 Dodge Ram 4500 - 2012 Dodge Ram 5500 

2013 Dodge Ram 2500 - 2013 Dodge Ram 3500 - 2013 Dodge Ram 4500  -2013 Dodge Ram 5500 

2014 Dodge Ram 2500 - 2014 Dodge Ram 3500 - 2014 Dodge Ram 4500 - 2014 Dodge Ram 5500

2015 Dodge Ram 2500 - 2015 Dodge Ram 3500 - 2015 Dodge Ram 4500 - 2015 Dodge Ram 5500 

2016 Dodge Ram 2500 - 2016 Dodge Ram 3500 - 2016 Dodge Ram 4500 - 2016 Dodge Ram 5500

2017 Dodge Ram 2500 - 2017 Dodge Ram 3500 - 2017 Dodge Ram 4500 - 2017 Dodge Ram 5500

2018 Dodge Ram 2500 - 2018 Dodge Ram 3500 - 2018 Dodge Ram 4500 - 2018 Dodge Ram 5500

Evolution Winch Mount Front Replacment
2010-2018 Dodge Ram 2500/3500

The Evolution Replacements are manufactured with a heavy 10 gage flat plate steel base for maximum protection. They are frame mounted with no vehicle modification necessary. The most distinguishing characteristic of our Evolution Series is the extreme craftsmanship put into the fit and finish of every unit. Don't have a winch now? No problem. Each of these bumpers comes with a removable access plate. Mount your fairlead in place of the plate when you get a winch. The Evolution bumper as priced is included with winch access holes on the front of the bumper. *Does NOT retain front parking sensors if applicable.
Standard features: Built in winch mount to hold up to a Warn 16.5 ti (excludes Power Plant), steel sleeves to hold factory fog lights, recessed pockets to retain factory tow hooks and the added value of the standard finish being a black wrinkle industrial powder coat. Approx 245 lbs.

Price: $1,595

Part #: EFR2010D

Hammerhead X-Series
2010-2018 Dodge Ram 2500/3500

Built with fully welded plate steel and finished with a durable black textured finish, Hammerhead bumpers were born with a backbone of quality. Hammerhead bumpers are 100% made in the U.S.A. of top quality 3/16" reinforced plate steel. The shackle mounts, welded front and back, are an extension of the frame mounted brackets to offer maximum strength when you need it most. This bumper has it all. Standard features include: winch ready (up to 16,500 lb Warn, not including PowerPlant), 'built-in' off road light compatible for (4) 4" LED lights, shackle mounts. *If truck is a 2016/2017 you must specify if your truck has front parking sensors*  Approx 205 lbs
Price: $2,393
Part #: 700-56-0158​

HD Pipe Bumper

2010-2018 Dodge 2500/3500

- Diamond plate & schedule 40 pipe used in production for strength
- Engineered for fitment, installation, strength and durability
- Retains parking sensors
- Convenient 2" receiver
- Punch plate grille, not expanded metal (mesh) 
- E-coated & powder coated
- Gloss finish
- Keep your factory tow hooks, fog lights, & license plate
- Front protection 

Price: $1,095

Part #: HD12260R