3/4" Steel Shackle Mount - $95
For serious off-roaders, our shackle mounts offer additional towing points on your vehicle and a great place to attach a winch cable back to the bumper when using a snatch block (pulley). These are ¾" CNC plasma cut steel tabs welded on to the pipe base with 1" holes to accommodate any of our heavy duty ¾" shackles.
Traditional Shackle Hooks - $39
Our traditional ¾" galvanized shackle hooks can be bolted to the shackle mounts and are great for hooking your tow strap or snatch block to when trying to get out of a tight spot. Rated at 10,000 lbs, they are strong enough for most any off-road enthusiast.
Heavy Duty Twisted Quick Release Shackle Hook- $78
Heavier Duty than our traditional shackle hook, these twisted quick relaese mounts are heat-treated and built to withstand a working load of 16,000 lbs. The usable length is 3" and the pin diameter is 3/4" while the clevis body diameter is almost 1" thick. They are powdercoated black to blend in with the bumper and have a yellow zinc dichromate plated pin to deter rust.
Heavy Duty Shackle Hook - $68
Heavier duty than our traditional shackle hooks but still have the same shape. These hooks are also bolt on and utilize a thicker diameter pin at almost 1". The usable length is 3" and the clevis body diameter is 7/8". The working load is 13,000 lbs. and the pin is coated with rust preventive zinc dichromate.
Universal Winch Box - $190 (Winch box can also be custom built for specific winches at no additional charge)
This CNC plasma cut winch box is unique from other winch boxes in that it allows your winch to remain exposed for ease of use, so that you can keep your cable from balling up as well as reach necessary levers and switches on your winch, especially if you have a Warn Power Plant. It is fabricated from heavy ⅜" plate and accommodates most winches on the market. Compatible winches are Mile Marker (please specify if you have a Mile Marker winch), Warn, and Ramsey up to a Warn 16.5k. The dimensions of this box are 29" wide x 9" deep with an 8" tall face plate unless built for a specific winch.
Front Bumper 2" Protruding Receiver - $85
There are a few main reasons one would need a receiver on the front of a truck. 1. It allows for the use of a removable winch plate as seen here. 2. It allows for the use of a tow hook as seen below. 3. It allows for the use of many other after-market accessories such as an upright mount to hold extra long PVC pipe or extension ladder that you might have attached to an over-the-cab bed rack.
Front Bumper Flush Mounted Receiver
Same uses as above...**NOTE: The shank of your accessory must be pinned from the back of the pipe, accessed from the bottom of the bumper, and requires at least 5¼" of unobstructed shank from pin hole to ball mount platform or any gussets. This is to allow it to pass through the 4" pipe base and be pinned on the back side of the pipe base.
2" Heavy Duty Tow Hook - $95
Some customers need more than just access to their factory tow hooks, they need a convenient, instantly available place to hook a chain or tow strap with heavy duty capabilities. Here's the solution. This tow hook is forged from a solid piece of steel, NOT hollowed out like some others. It has a tow rating of 12,000 lbs, weighs almost 9 lbs. and is powdercoated black.
Heavy Duty Welded Light Tab - $55 (per 2-4)
Welded to the cross bars as an optional accessory, the light tabs are perfect for off road enthusiasts who want to mount large running lights to the front bumper.
Custom Fog Light Sleeve to fit factory fog lamps - $165
So that you can keep the factory fog lights on your truck, a plasma cut hole is made and a hand formed steel tube is welded in its place. Custom fabricated brackets are welded to the diamond plated steel to hold the lights as if they were mounted in the factory. This keeps your lights protected and gives you that clean sleeve look. Our secure mounts show how we take the extra steps to give your new bumper a truly custom look for your factory lights. We also now offer custom sleeves for Rigid Industries 4" and 6" LED lights, which are by far the highest quality light on the market today.
Now Available with Rigid Industries Custom Light Sleeves
Expanded Metal Mesh - $85
Our Expanded Metal Grill will protect your truck's front grill and radiator from debris, sticks, and branches. It is made from a ¾" #9 flat expanded metal sheet and is welded into the grill section of your bumper during manufacturing
Underside of a bumper showing solid welds and thick steel brackets
Note: custom sensor sleeves only available upon request at additional charge
Custom Reverse Sensor Sleeves (Rear Bumpers Only) Ford/Chevy - $165
If you want your sensors to continue to operate as if they are on the factory bumper, these custom sensor sleeves are by far the best on the market. The factory sensors slide in to the hand machined sleeves and tighten with a set screw. Note: Custom sensor sleeves only available upon request at additional charge and are only available on our Tough Country premium line of rear bumpers.
Flat Black Wrinkle Powdercoat Finish: $345
Over the years, bumpers have become more sophisticated, and so have our customers. For those who want to further set themselves apart, not only in the quality category, but also in the appearance category, this is one finish to give some serious thought to. It is our tough wrinkle powdercoat finish. Although it is not "wrinkled" as you may think, it has a very rough sand paper like feel and doesn't produce glare like the gloss black powdercoating does.
Bedliner Finish: $295
The toughest finish available, and surprisingly the least expensive custom finish we offer. For those who need something that will offer far more protection than any other coating, this is it. The extremely rough textured coating is sprayed, ON TOP OF the anti-rust agent base coat AND the original gloss black powdercoat, totaling three layers of protection. We generally recommend this finish to folks who live up north in the snow and salty roads but it is also very useful for those who constantly drive through brush and small trees.
Custom Color Options:
Silver Vein Coating
Pale Adobe - Pueblo Gold - Arizona Beige
(includes clear coat)